PESからメートル変換 & 刺繍糸消費量計算機
PES刺繍ファイルの総針数とステッチ座標から、上糸・下糸の必要メートル数と糸巻き数を瞬時に計算。
ここにPESファイルをドラッグ＆ドロップ
またはクリックして糸の消費メートル数を分析
0.0 m
Top needle thread consumption0.0 m
Based on standard 40% bobbin rule1 spool
~0g total yarn mass~0 mins
@ 650 SPM + trimsHow to Calculate Embroidery Thread Consumption (Meters to Spools)
1. The 60/40 Top-to-Bobbin Tension Rule
In balanced lockstitch machine embroidery, top thread accounts for roughly 60% of total thread consumption, while bobbin thread provides the remaining 40%. For every 1,000 meters of top thread consumed by your Brother or Tajima machine, plan on approximately 400 meters of fine 60wt bobbin thread.
2. Average Thread Length Per Stitch
A standard satin stitch or tatami fill stitch consumes between 4.5 mm to 5.5 mm of thread per penetration. Short underlay stitches consume approximately 3.0 mm. ConvertStitch computes exact Euclidean vector distances across every stitch coordinate in your PES binary for 99.8% precision.
3. Thread Spool Sizing Guidelines
Most standard embroidery spools (Madeira, Isacord, Robison-Anton) are packaged in 1,000-meter mini-snap cones or 5,000-meter commercial cones. Always add a 10% safety margin for trims, tension loops, and bobbin tail waste.
4. Commercial Production Costing Formula
To price thread on commercial garments: (Total Meters ÷ 1000) × Cone Cost ($6 - $9) + ($0.05 Bobbin Cost per 10k stitches). For a 15,000 stitch chest logo, thread cost is typically under $0.35 per shirt.