Convertir PES en Mètres & Calculateur de Fil
Calculez exactement la longueur de fil supérieur, la canette et les bobines nécessaires pour vos fichiers PES.
Glissez votre fichier PES ici
ou cliquez pour analyser la consommation de fil en mètres
0.0 m
Top needle thread consumption0.0 m
Based on standard 40% bobbin rule1 spool
~0g total yarn mass~0 mins
@ 650 SPM + trimsHow to Calculate Embroidery Thread Consumption (Meters to Spools)
1. The 60/40 Top-to-Bobbin Tension Rule
In balanced lockstitch machine embroidery, top thread accounts for roughly 60% of total thread consumption, while bobbin thread provides the remaining 40%. For every 1,000 meters of top thread consumed by your Brother or Tajima machine, plan on approximately 400 meters of fine 60wt bobbin thread.
2. Average Thread Length Per Stitch
A standard satin stitch or tatami fill stitch consumes between 4.5 mm to 5.5 mm of thread per penetration. Short underlay stitches consume approximately 3.0 mm. ConvertStitch computes exact Euclidean vector distances across every stitch coordinate in your PES binary for 99.8% precision.
3. Thread Spool Sizing Guidelines
Most standard embroidery spools (Madeira, Isacord, Robison-Anton) are packaged in 1,000-meter mini-snap cones or 5,000-meter commercial cones. Always add a 10% safety margin for trims, tension loops, and bobbin tail waste.
4. Commercial Production Costing Formula
To price thread on commercial garments: (Total Meters ÷ 1000) × Cone Cost ($6 - $9) + ($0.05 Bobbin Cost per 10k stitches). For a 15,000 stitch chest logo, thread cost is typically under $0.35 per shirt.